[Event Information]

CPD2018 Kanto (310rd CPD Seminar)
place: Everyone's meeting room Shibuya Miyamasu-zaka
Address: 150rd floor, TOC 0002st Building, 1-8-3 Shibuya, Shibuya-ku, Tokyo XNUMX-XNUMXExterior of the building）
Station walk: 4 minutes walk from Shibuya station
Lecture 1: 14: 00-15: 00
Lecturer: JSPE Vice Chairman Ryo Moriyama
Lecture title: Issues related to the introduction of biomass power generation
Issues about introduction of biomass power generation
Outline of the lecture: Power generation from renewable energy (renewable energy) is showing significant growth due to the introduction of the feed-in tariff (FIT) system.On the other hand, there are still some necessary efforts to make renewable energy the main power source, which was also shown in the Fifth Basic Energy Plan.In this lecture, we will describe the characteristics of biomass power generation that are different from other power sources and the issues of introduction, and describe the issues to be examined for the future main power source of renewable energy.

Lecture 2: 15: 15-16: 30
Lecturer: Shizen Energy Inc. Hiroshi Ito (PE member)
Lecture title: Prospects for renewable energy and status of efforts
Prospects and efforts of renewable energy
Outline of the lecture: We will introduce future trends in renewable energy and renewable energy initiatives, including solar power generation, biomass power generation, and specific project examples (wind power generation, small hydropower generation).

Participation fee: JSPE member 1,500 yen, JSPE non-member 2,500 yen

[Implementation report]

Participation: 24 people (PE 20 people, PEN 3 people, FE 1 person)

At the Tokyo venue, Vice Chairman Moriyama said, "On the issues of introducing biomass power generation., Mr. Ito gave a lecture on the theme of "Prospects for Renewable Energy and Status of Initiatives"did.
Vice Chairman Moriyama said, "XNUMX% of biomass power generation does not work. Raw materials"Wood chips are imported," he said, "Japan has a lot of forests (= no problems with raw materials)."From the point of view of myself, I started with words that had a very high impact.
Examples of biomass power generation business are methane fermentation (power generation by engine from biogas obtained from livestock excrement and food waste methane fermentation process), gasification (heat decomposition of pellets and power generation from the obtained gas), wood quality. Introducing the outline of fuel power generation (power generation using pellets as a fuel source for boilers) and their technical and systematic issues.I received it.
Regarding stable and continuous raw material procurement, the agricultural sector and power generation bluntPlant engineer rigs (chemical engineering, mechanical engineering, civil engineering, electricity, instrumentation, etc.),Tan fermentation requires sanitary engineering such as water treatment and odor control, and extensive engineer knowledge.It is being used.
In order to overcome multiple issues, it seems necessary to derive the optimum solution for coexistence of small (local production for local consumption) and large power generation, and coexistence with domestic and imported lumber.

From Ito members, technology in the United States and the Middle East where land can be used effectivelyHigher efficiency and cost reduction of elemental equipment by innovation, solar power generation and wind power generation once installedInstallation of equipment has the advantage of not requiring raw materials such as LNG and coal, so it is cost effective.In terms of rate, it is at a level that is sufficiently competitive compared to power generation using conventional fossil fuels.There is no doubt that domestic energy demand will decrease, but renewable energyAfter explaining that the proportion will increase, the "natural power group" to which he belongs is a clue.As examples of local production for local consumption energy power generation, wind power generation in Karatsu, Saga Prefecture, Obuse, Nagano PrefectureHe introduced the small hydroelectric power generation project of Japan with a dynamic video.
The required engineering skills are different from "biomass power generation"In order to properly evaluate the manufacturer's deliverables during project execution,It is characterized by the fact that a system has been formed that allows the fluid analysis to be carried out in-house.
From the participants, environmental assessment items, the influence of low frequency sound from the windmillI had a question about it.In addition, application of small hydroelectric power generation facilities to municipal water treatment plants, wind power＋ Current activity related to tidal current power generation (rotating ship propellers to generate power) and offshore wind power generationDiscussion was held.

"Project manager" to have a broad perspective and integrate each elemental technologyI felt that "jiment ability" is an essential item common to both themes.

State of the venue

JSPE (Kawase / Yamaguchi)